OZA Piping System Private Limited

OZA PIPING SYSTEM PVT. LTD.  ( An ISO 9001-2015 Certified Company)
  We are Leading Manufacture In Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.

HDPE Electrofusion Elbow is used to turn pe Pipes to 45 & 90 Degree. in Project Work.

Made of PE100 material with aprecisely molded energized coil of wire,
it ensures uniform melting of the strongly electrofused joint andminimizes welding and cooling time.

OZA PIPING SYSTEM PVT. LTD.  ( An ISO 9001-2015 Certified Company)
  We are Leading Manufacture In Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.

Manufactures Electrofusion Tee of size d 63 to 315 mm. Tee in diameters larger than 315 mm to 1200mm  are sourced from well-known and reputed Western sources and are guaranteed by OZA.

These are manufactured in PE100 (Black) grade and are Standard SDR 11 rated. For exact recommendations on compatibility for welding with SDR 9 through SDR 21 or PN6 through PN 16 pipes, refer our Technical Specifications Manual.

O+ Electrofusion Fittings  are suitable for permanently connecting PE80 and PE100 pipes, both in straight as well as coil form.

Standards:
PE Pipe Compatibility: IS:14885, 150:4437, EN:1555-2, EN:12201-2, ISO:4427, IS:4984, DIN:8074
Complies with EN 1555- Part 3 & EN 12201 -Part 3

Installation Process:

Joint preparation must be done as specified in the installation instructions. Pipe outside surface must be scraped to remove oxidized layer. Before fusing, pipe ends and inside of the fittings must be cleaned to remove dirt and contamination. Complete Installation Manual may be downloaded.

Advantages:
Standard Operating Voltage-40 V
Same fusion time for various SDR & PN rated pipes
Higher penetration of pipe in the fittings enables proper alignment
Optimal fusion and cold zone for a sturdy joint Auto Temperature compensation for ambient conditions of - 5°C to +40°C
Clearance-Fit for ease of installation & Centre Stop (removable) for ease of repairs
Pop-Up fusion indicators to indicate fusion process performance
Permanent Batch Indicator, Fusion lime, Cooling lime, Raw Material Grade and SDR marking.

Each fitting individually packed to protect against contamination and oxidation
Each fitting with water-proof bar code to automatically feed fusion data to the Control-box for fusion process

We are successfully meeting the requirements of our clients by offering the best quality range of HDPE Electrofusion TEE Fittings.

OZA PIPING SYSTEM PVT. LTD.  ( An ISO 9001-2015 Certified Company)
  We are Leading Manufacture In Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.

With a firm commitment to quality, our organization is engaged in offering a wide ambit of Electrofusion Endcap.
Available Size 63mm to 250mm

Additional Information:

• Packaging Details: BOX PACKING

OZA PIPING SYSTEM PVT. LTD.  ( An ISO 9001-2015 Certified Company)
  We are Leading Manufacture In Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.

Manufactures Electrofusion Coupler of size d 63 to 315 mm. Coupler in diameters larger than 315 mm to 1200mm  are sourced from well-known and reputed Western sources and are guaranteed by OZA.

These are manufactured in PE100 (Black) grade and are Standard SDR 11 rated. For exact recommendations on compatibility for welding with SDR 9 through SDR 21 or PN6 through PN 16 pipes, refer our Technical Specifications Manual.

O+ Electrofusion Fittings  are suitable for permanently connecting PE80 and PE100 pipes, both in straight as well as coil form.

Standards:
PE Pipe Compatibility: IS:14885, 150:4437, EN:1555-2, EN:12201-2, ISO:4427, IS:4984, DIN:8074
Complies with EN 1555- Part 3 & EN 12201 -Part 3

Common Applications:
Pipe to pipe connection during laying
Pipe connections in areas difficult to access, in narrow trenches
Repairing localised damages on pipes
Connections of transition fittings, pipe stub ends etc.

Pipe Connections with spigot end fittings
Reinforcements of squeezed or kinked portions of permanently laid down (immovable) pipes


Installation Process:

Joint preparation must be done as specified in the installation instructions. Pipe outside surface must be scraped to remove oxidized layer. Before fusing, pipe ends and inside of the fittings must be cleaned to remove dirt and contamination. Complete Installation Manual may be downloaded.

Advantages:
Standard Operating Voltage-40 V
Same fusion time for various SDR & PN rated pipes
Higher penetration of pipe in the fittings enables proper alignment
Optimal fusion and cold zone for a sturdy joint Auto Temperature compensation for ambient conditions of - 5°C to +40°C
Clearance-Fit for ease of installation & Centre Stop (removable) for ease of repairs
Pop-Up fusion indicators to indicate fusion process performance
Permanent Batch Indicator, Fusion lime, Cooling lime, Raw Material Grade and SDR marking.

Each fitting individually packed to protect against contamination and oxidation
Each fitting with water-proof bar code to automatically feed fusion data to the Control-box for fusion process

Additional Information:

• Packaging Details: BOX PACKING

OZA PIPING SYSTEM PVT. LTD.  ( An ISO 9001-2015 Certified Company)
  We are Leading Manufacture In Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.

HDPE Electrofusion Reducer is used to  reducing of Pe Pipes.

Made of PE100 material with aprecisely molded energized coil of wire,
it ensures uniform melting of the strongly electrofused joint andminimizes welding and cooling time.

OZA PIPING SYSTEM PVT. LTD. We Manufacture Electrofusion Fittings , Buttfusion Fittings , Moulded and Fabricated, Welding machine , Laying and Jointing Services, Machine Rental etc.
Manufactures Air Valve Tee for Irrigation Projects . Size 63 to 1600 any Diameter of Pipe , Easy to Install Air Valves
These are manufactured in PE100 (Black) grade and are Standard SDR 11 rated. For exact recommendations on compatibility for welding with SDR 9 through SDR 21 or PN6 through PN 16 pipes, refer our Technical Specifications Manual.
O+ Electrofusion Fittings  are suitable for permanently connecting PE80 and PE100 pipes, both in straight as well as coil form.

Standards:
PE Pipe Compatibility: IS:14885, 150:4437, EN:1555-2, EN:12201-2, ISO:4427, IS:4984, DIN:8074
Complies with EN 1555- Part 3 & EN 12201 -Part 3
Common Applications:
Pipe to pipe connection during laying
Pipe connections in areas difficult to access, in narrow trenches
Repairing localised damages on pipes
Connections of transition fittings, pipe stub ends etc
Pipe Connections with spigot end fittings
Reinforcements of squeezed or kinked portions of permanently laid down (immovable) pipes

Installation Process:

Joint preparation must be done as specified in the installation instructions. Pipe outside surface must be scraped to remove oxidized layer. Before fusing, pipe ends and inside of the fittings must be cleaned to remove dirt and contamination. Complete Installation Manual may be downloaded.

Advantages:
Standard Operating Voltage-40 V
Same fusion time for various SDR & PN rated pipes
Higher penetration of pipe in the fittings enables proper alignment
Optimal fusion and cold zone for a sturdy joint
Auto Temperature compensation for ambient conditions of - 5°C to +40°C
Clearance-Fit for ease of installation & Centre Stop (removable) for ease of repairs
Pop-Up fusion indicators to indicate fusion process performance
Permanent Batch Indicator, Fusion lime, Cooling lime, Raw Material Grade and SDR marking
Each fitting individually packed to protect against contamination and oxidation
Each fitting with water-proof bar code to automatically feed fusion data to the Control-box for fusion process